Class Of Service - Panasonic KX-TD816 Installation Manual

48 0
Extension Programming
Class of Service
601
Description
Programs each extension for a Class of Service (COS). The COS
determines the call handling abilities of each extension.
Selection
l
Jack number:
KX-TD8 16; 01 through 16, *
(-1
/ -2),
KX-TD1232; 01 through 64, * (-1 / -2),
( * =all jacks, -1 = first part, -2 = second part)
l
COS number: 1 through 8
Default
All jacks-l/2 - COS 1
Programming
1.
2.
3.
/
Conditions
4.
5.
6.
7.
8.
Enter 601.
Display: COS Assign
Press NEXT.
Display: Jack NO?->
Enter a jack number.
To
enter jack number 01, you can also press NEXT.
To
select the second part (-2), press NEXT after entering a jack
number.
Display example: #Ol-1:COSl
Enter a COS number.
To
change the current entry, enter the new number.
Press STORE.
To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
Repeat steps 4 through 6.
Press END.
l
There
is
a
maximum of eight
Classes of Service. Every extension
must be assigned to a Class of Service and is subject to the COS
Programming of programs [500] through [5083 and [991].
l
In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
l
For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
l
To assign all jacks to one COS, press the * key at step 3. In this
case, the display shows the contents progmmmed for Jack 0 1.
**
Program [8 111 "DISA User Codes" is also used to assign a Class of
Service to a DISA User Code.
Feature References
Section 3, Features,
Class of Service (COS)
*: Available for
KX-TD 1232 only.
System Programming
4-105