Panasonic KX-TD816 Installation Manual page 357

806-807
49
l
Resource Programming
EIA (RS-232C) Parameters
Description
New line code:
Baud rate:
Word length:
Parity:
Stop bit:
Selection
Default
Programming
Assigns the communication parameters for the EIA (RS-232C)
interface for
Port 1 (for KS-TD816 and Master System of KX-
TD1232)
or
Port 2 (for Slave System of ICY-TD1232).
Select the code for your printer or personal computer. If your
printer or personal computer automatically feeds lines with carriage
return, select "CR." If not, select "CR+LF."
A baud rate code indicates the data transmission speed from the
system to the printer or personal computer.
A word length code indicates how many bits compose a character.
A parity code indicates what type of parity is used to detect an error
in the string of bits composing a character. Make an appropriate
selection depending on the requirements of your printer or personal
computer.
A stop bit code indicates the end of a bit string which composes a
character. Select an appropriate value depending on the
requirements of your printer or personal computer.
New line code: CR+LF / CR
(CR-Carriage Return, LF-Line Feed)
Baud rate (baud):
150 / 300 / 600 / 1200 / 2400 / 4800 / 9600
Word length (bits): 7 / 8
Parity bit:
None /Mark I Space / Even / Odd
Stop bit length (bits):
1
/ 2
New line code = CR+LF; Baud rate = 9600; Word length = 8;
Parity bit = Mark; Stop bit = 1 -Port
1 / Port 2
,
1.
2.
3.
4.
5.
6.
Enter a
program address (806 for Port 1 or 807 for Port 2).
Display example: RS232C Paramet.1
Press NEXT
to program new line code.
Display example: NL-Code:CR+LF
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press NEXT to program baud rate.
Display example: Baud Rate:9600
Keep pressing SELECT until the desired selection is
displayed.
4-120 System Programming