Caller Id Code Set - Panasonic KX-TD816 Installation Manual

110
43 a
System Programming
Caller
ID Code Set
Description
Sets the identification code of the calling party (Caller ID Code) to
utilize Caller ID Service provided by a specific central office (CO).
If an ID Code transmitted from CO is found in Caller ID Code
Table, the caller's ID Code or a name given to the code in program
[ 11
l] "Caller ID Name Set" is displayed on the telephone, allowing
the called party to recognize the caller.
Selection
Default
Programming
Conditions
l
Location number: 001 through 250
9 Caller ID Code:
11 digits (max.)
All locat'ions - Not stored
1.
Enter 110.
Display
:
Caller ID Code
2.
Press NEXT.
Display
:
Location NO?->
3.
Enter a location number.
To
enter
location number
001,
you can
also press NEXT.
Display example: OO1:Not Stored
4. Enter a Caller ID Code.
To
delete the current entry, press CLEAR.
To
change the current entry, press CLEAR and the new code.
5.
Press
STORE.
6. To program another location, press NEXT
or
PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8.
Press
END.
l
There
is a
maximum of 250 Caller ID Codes. Each code has a
maximum of
11
digits, consisting of 0 through 9.
._
l
Program [
11 l] "Caller ID Name Set" is used
to give names to
Caller
ID
Codes. If an ID Code is given a name, the called party's telephone
shows the name in place of the ID Code.
. Program [406] "Caller ID Assignment" is
used to enable Caller
ID
Service on a CO line basis.
Feature References Section 3, Features,
Caller
ID
4-42
System Programming