Pause Time - Panasonic KX-TD816 Installation Manual

45 0
CO Line Programming
.412
Pause Time
Description
Selection
Default
All CO line groups - 1.5 s
Programming
Conditions
Feature References
Assigns the length of the pause time. The programmed pause time
is automatically inserted after a line access code or a host PBX
access code programmed in [411] "Host PBX Access Codes" or
manually inserted if the
PAUSE
button is pressed by the user.
l
CO line group number: 1 through 8, * ( * =a11 CO line groups)
l
Time (seconds): 1.5 / 2.5 / 3.5 / 4.5
1. Enter 412.
2.
3.
Display: TRG Pause Time
.C
Press
NEXT.
Display: TRK GRP NO?->
Enter a CO line group number.
To
enter
CO
line groupnumber 1
,youcan also
press
NEXT.
Display example: TRGl:l.Ssec
4.
5.
6.
Keep pressing
SELECT until the desired time is displayed.
Press STORE.
To program another CO line group, press
NEXT or PREV, or
SELECT and the desired CO line
group
number.
7. .Repeat steps 4 through 6.
8.
Press END.
l
To assign all CO line groups to one selection, press the * key at step 3.
In this case, the display shows the contents progr&nmed for CO line
group 1.
l
Program [401] "CO Line Group Assignment" is used to assign each CO
line to a CO line group.
Section 3, Features,
Host PBX Access Pause Insertion, Automatic
System
Programming
3-9
I