2.4.11 Battery Adaptor Connection
Connection
User-supplied
gel cell batteries can be used as a backup power
supply in the event of a power failure. In case of power failure, the
batteries automatically
maintain the power to the main unit
instantly.
The optional Battery Adaptor, model KX-A46, is
required.
The Battery Adaptor should not be exposed to direct sunlight.
Keep the adaptor and gel cell batteries away from heating
appliances and fire. Place gel cell batteries in an airy place.
When connecting
the battery adaptor, keep the following in mind.
l
Make sure of the polarities of batteries and wires.
l
Make sure that you do not short the batteries and wires.
l
To connect the two batteries, use accessory wire.
Gel
cell batteries
Red (c)
Yellow (-)
1. Assemble the cords and two gel cell
I2 VDC
batteries (12VDC each) as shown.
ue (-)
12 VDC
Ground Terminal
2. Insert the plug of the battery adaptor into
the battery adaptor connector on the
main unit.
Connect the ground wire to the ground
terminal on the main unit.
Wire
3. Turn on the power switch of the battery
adaptor.
LED
K
Power Switch
2-60
Installation