Table of Contents
Advertisement
6.3.9
Menu 09 "Ext Set"
User-PIN
01 = Int Set
02 = Cct Off
03 = Disp Cct Off
04 = Change PIN
05 = Disp CctFault
06 = Test
07 = Alarm Counter
08 = Log
09 = Ext Set *
10 = Time/Date *
11 = Input Eng.PIN
12 = Tamp.Reset *
14 = Delete **
15 = Cancel Print
6.3.10 Menu 10 "Time/Date"
User-PIN
01 = Int Set
02 = Cct Off
03 = Disp Cct Off
04 = Change PIN
05 = Disp CctFault
06 = Test
07 = Alarm Counter
08 = Log
09 = Ext Set *
10 = Time/Date *
11 = Input Eng.PIN
12 = Tamp.Reset *
14 = Delete **
15 = Cancel Print
Operation of the L240
Menu 09 "Ext Set" VdS: If the Intrusion Alarm System is operated without
an external switching or setting device (e.g. SafeKey, contact lock or non-
contact switching device), an external setting within the security area can be
implemented via a Keypad L240/PT. Only the area, which is assigned to the
keypad, can be externally set. Further information can be found in chapter
"Programming the keypads".
Note: False alarms are possible with this kind of setting, as unintended
access to the secure area by the user/operator cannot be ruled out.
Therefore, this function does not comply with the German guidelines and
standards.
Menu item 10 "Time/Date" VdS: In this menu, the time and date can be
changed. A change is also recorded in the event log. This function is not
enabled ex-works for the user and it is only accessible after entering the
Engineer PIN.
1 = Time
2 = Date
In submenu "1=Time" the time can be changed. After pressing the
the time can be entered (Hour:Minute).
Clock set to
12:26
Current time
Clock
Enter HH:MM
Enter new time
Clock set to
13:14
New time
In submenu "2=Date" the date can be changed. After pressing the
the date should be entered (day-month-year).
Date set to
Fri 18 Jul 2008
Current date
Date
Enter DDMMYYYY
Enter new date
Date set to
Mon 18 Aug 2008
New date
!
button
!
button
!
button
!
button
33
Advertisement
Table of Contents
