Table of Contents
Advertisement
8
Configuration and programming
8.1
Overview
Operation by the Engineer
In the "Programming" submenu, the Intrusion Alarm Panel L240 can be fully
programmed by the Engineer. The panel is pre-programmed ex-works and
can be immediately operated without being programmed beforehand.
The changes must only be undertaken in a few of the programming steps in
the corresponding submenus. The comprehensive possibilities are
represented in the overview on the following page. Comfortable
programming is possible with the Software "WIN-PC" and the Interface
Module L208/V.24.
Access to the programming level is only possible from access level 1. First of
all, a user must gain access to access level 1 with his user PIN, now the
Engineer can use his Engineer PIN code to use access level 2 and access
the programming level via the sub menu "08=Programming".
44
Advertisement
Table of Contents
