L240/BS
12.2.7 Transistor outputs
Transistor outputs T1 to T4 each switch via a series resistor to +12 V and
can be used for control, e.g. of an LED, a reed relay or an internal siren.
Every two transistor outputs have a common 0 V connection.
Transistor outputs T1 and T2 can each be loaded with 20 mA; T3 and T4
can each be loaded with 15 mA. When light emitting diodes (LEDs) are
connected, it is recommended that LOW Current LEDs are used to reduce
current consumption.
83