Table of Contents
Advertisement
Configuration and Programming by the Engineer
8.1.1
Menu 01 "System Size"
Engineer-PIN
8 = Edit
01 = System Size
02 = Area Opts
03 = Circuits
04 = Relay
05 = Alarm Times
06 = Keypads
07 = Concs *
08 = User Auth
09 = Text
10 = L240/B/BS*
11 = XS/1.1 KNX *
13 = 2-Conc Tamper *
15 = Defaults
16 = XIB-Detectors
Menu item "01=System Size": The bus devices connected to the XIB
security bus (e.g. modules and keypads) must be logged on. After login, the
bus devices are monitored by the panel. If bus modules are logged off again,
they must be disconnected from the XIB security bus.
Number of setting ranges:
System Size
Areas-1
Number of detector circuit modules L240/MG2 and L840/MG4:
System Size
Concs-00
The supplementary Power Supply Unit L240/N is treated in the same way as
a Detector Circuit Module L840/MG4, i.e. it must be counted here as a circuit
module and is thus addressed on the DIP switches.
Note: A maximum of up to 24 circuit modules can be managed by the panel
(L240/MG2 or L840/MG4 - or combined). Of these, only a maximum of 16
circuits may be Detector Circuit Modules L840/MG4!
Number of Evaluation Module L240/BS:
System Size
L240/B/BS-00
Number of keypads and L240/PT:
System Size
Keypads-1
In the default delivery state, the panel automatically recognizes a keypad
with the address 1.
Note: A keypad with the address "0" (Engineer keypad) can be connected for
service purposes to the internal XIB security bus (left terminal CN11). This
keypad may not be registered.
Interface Module L208/V.24 or L240/IP:
System Size
SM-2
Here you enter if a serial Interface Module L208/V.24 or a LAN IP Interface
L240/IP is connected. Only one interface can be operated on the panel. If
yes, "2" must be entered as the identity.
Note: In the default delivery state, a "2" is already entered, even if an
interface module is not connected. After the connection of an interface
module, this is detected by the panel and then monitored.
(Limit 1-4)
(Limit L240/MG2 0-24
and L840/MG4 0-16)
(Limit L240/BS 0-16)
(Limit 1-7)
(0 or 2)
46
Advertisement
Table of Contents
