Toshiba e-studio200l Service Handbook page 176

Classifi-
Code
cation
1394 Paper Feeding retry counter
feeding (bypass feed)
1395 Paper Feeding retry counter
feeding (LCF)
1396 Paper Feeding retry counter
feeding upper limit value
(Upper drawer)
1397 Paper Feeding retry counter
feeding upper limit value
(Lower drawer)
1398 Paper Feeding retry counter
feeding upper limit value
(PFP upper drawer)
1399 Paper Feeding retry counter
feeding upper limit value
(PFP lower drawer)
1400 Paper Feeding retry counter
feeding upper limit value
(Bypass feed)
1401 Paper Feeding retry counter
feeding upper limit value
(LCF)
1410 Counter Counter for period of toner
cartridge rotation time
1411 Counter Counter for envelope
1422 Data HDD data overwriting type
overwrite setting
kit
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08) <e-STUDIO200L/230/230L/280>
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
2 - 140
05/05
Default
<Accept-
RAM
able
value>
0 M Counts the number of
<8 digits> times of the feeding
retry from the bypass
tray.
0 M Counts the number of
<8 digits> times of the feeding
retry from the LCF.
0 M When the number of
<8 digits> feeding retry (08-1390
to 08-1395) exceeds
the setting value, the
0 M
feeding retry will not be
<8 digits>
performed subse-
quently. In case "0" is
0 M
set as a setting value,
<8 digits>
however, the feeding
retry continues regard-
0 M
less of the counter set-
<8 digits>
ting value.
0 M
<8 digits>
0 M
<8 digits>
0 M Counts up the period of
<8 digits> rotation time of the
toner cartridge.
0 M Counts up when the
<8 digits> registration sensor is
ON.
When the counter value
of the fuser roller is
reset, this counter is
reset in sync at the PM
support mode.
3 SYS HDD data is cleared by
<0-4> overwriting the type of
value set in this code.
(This setting is enabled
only when the GP-1050
is installed.)
0: "00" overwriting only
1: "FF" overwriting
only
2: Random number
overwriting only
3: "00" + "FF" + ran-
dom number over-
writing (validation
ON)
4: "00" + "FF" + ran-
dom number over-
writing (validation
OFF)
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Proce-
Contents
dure
1
1
1
1
1
1
1
1
1
1
1