Toshiba e-studio200l Service Handbook page 598

[C] Display during the update
The processing status is displayed as follows on the LCD screen during the update.
(As an example, the display for updating the system ROM is explained below.)
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
FIRMWARE UPDATING
Press [START] button after selecting the item to
be updated. The device check starts.
When the device check completes, erasing the
data in the ROM of the equipment starts.
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
6 - 18