[B]
Adjusting carriages-1 and -2 positions
<Procedure>
(1)
Move the carriage-2 toward the exit side.
(2)
Loosen the screws fixing the front side pulley bracket, make the sections A and B of the carriage-
2 touch with the inside of the exit side frame and screw them up.
[Rear]
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Carriage-2
Pulley bracket
B
Fig. 3-31
3 - 43
[Front]
Exit side frame
A
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
3
ADJUSTMENT