Adjustment Of Skew - Toshiba e-studio200l Service Handbook

3.11.3

Adjustment of Skew

Note: Note:
Check if the image adjustment for the equipment is performed properly before this adjustment of
the RADF. Also, the RADF position and height shall be adjusted properly.
[A] Checking
Check the image using the chart (original) with vertical and horizontal lines in the following procedure.
Simplex copying:
(1) Place the chart provided as an original with its face up on the original tray of the RADF, select [1
Sided -> 1 Sided] and press the [START] button.
(2) Superimpose the chart on the copy and check the inclination of the copy image.
Duplex copying:
(1) Place the chart provided as an original with its face up on the original tray of the RADF, select [2
Sided -> 2 Sided] and press the [START] button.
(2) Superimpose the chart on the copy and check the inclination of the copy image.
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-95 Chart (Original)
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
3 - 77
05/11
3
ADJUSTMENT