Toshiba e-studio200l Service Handbook page 421

(4) Connect the connector of the counter socket
to the harness connector of the equipment
side.
(5) Install the counter socket to the machine
frame with two screws.
(6) Reattach the cover.
(7) Insert the key copy counter with its arrow
mark pointing the rear side of the equipment.
(8) Enter the value "3" in the setting mode (08-
202).
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Harness connector
Counter socket
Screw
Fig. 3-136
Fig. 3-137
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
3 - 101
06/01
Key copy counter
ADJUSTMENT
3