Toshiba e-studio200l Service Handbook page 276

Setting mode (08) <e-STUDIO202L/203L/232/233/282/283>
Classifi-
Code
cation
3784 Network DSN Server resolve type
3785 Network DPWS IPv4 or IPv4 with
IPv6
3793 Network Switching LLTD setting
3794 Network Switching LLMNR setting
3796 Network DPWS EventRate
3797 General Response to PJL job com-
mands
3804 Scanner List Analysis Logic of Scan
to File (FTP)
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
2 - 240
09/02
Default
<Accept-
RAM
able
value>
4 NIC Either "ip6.arpa" or
<1-4> "ip6.int" is selected for
the name resolution in
DNS.
1: "ip6.arpa" only
2: "ip6.int" only
3: In case of error with
"ip6.int", "ip6.arpa"
is requested.
4: In case of error with
"ip6.arpa", "ip6.int"
is requested.
2 NIC Either IPv4 only or IPv6
<1-2> together with it is
selected to operate
Print, Scan and Secu-
rity related with DPWS.
1: Multi (IPv4 and
IPv6)
2: IPv4
1 NIC LLTD function is
switched.
<1-2>
1: Enabled
2: Disabled
2 NIC LLMNR function is
switched.
<1-2>
1: Enabled
2: Disabled
5 NIC Sets the value of
<1-600> DPWS event rate from
1 to 600.
1 SYS During bidirectional
<0-1> communication, the
next job will not be
accepted until the print-
ing of the sent data (all
pages) is finished. If the
next job must be
accepted during bidi-
rectional communica-
tion, set the value at "0:
(Solicited)".
0: (Solicited) - Immedi-
ately responds to
the host side after
the completion of
RIP.
1: (Unsolicited) -
Responds to the
host side after the
printing is finished.
0 SYS Acquisition of Contents
<0-1> in Host side is switched
by Scan to File (FTP).
0: NLST
1: LIST
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Proce-
Contents
dure
12
12
12
12
12
1
1