Siemens sinumerik 840D sl Function Manual page 198

Data lists
5.1 Machine data
5.1.1 General machine data
Number Identifier: $MN_
10050 SYSCLOCK_CYCLE_TIME
10059 PPOFIBUS_ALARM_MARKER
10060 POSCTRL_SYSCLOCK_TIME_RATIO
10061 POSCTRL_CYCLE_TIME
10062 POSCTRL_CYCLE_DELAY
10070 IPO_SYSCLOCK_TIME_RATIO
10071 IPO_CYCLE_TIME
10080 SYSCLOCK_SAMPL_TIME_RATIO
11250 PROFIBUS_SHUTDOWN_TYPE
5.1.2 Axis/spindlespecific machine data
Number Identifier: $MA_
33000 FIPO_TYPE
37600 PPOFIBUS_ACTVAL_LEAD_TIME
37602 PPOFIBUS_OUTVAL_DELAY_TIME
Special functions: Cycle Times (G3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
Description
Basic system clock cycle
PROFIBUS alarm marker (internal only)
Factor for position control clock cycle
Position control cycle
Position control cycle offset
Factor for interpolator clock cycle
Interpolator cycle
Division factor of the position control cycle for actual
value acquisition
PROFIBUS DP shut down handling
Description
Fine interpolator type
Actual-value acquisition time (PROFIBUS Ti)
Setpoint delay time (Profibus To)
5
21