Siemens sinumerik 840D sl Function Manual page 251

2.2.4 Programming
Definition
The following modal language commands work with curve tables: (The parameters are
explained at the end of the list of functions.)
• Beginning of definition of a curve table:
• End of definition of a curve table:
• Deleting curve table(s):
• CTABDEL(n, m, memType)
• Read the following value for a master value
• Read the master value for a following value
Special functions: Axis Couplings and ESR (M3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
CTABDEF(following axis, leading axis, n, applim, memType)
CTABEND()
CTABDEL(n)
; curve table n
CTABDEL(n, m)
; [n < m], more than one in the range of numbers
; it is deleted in static "SRAM" and in dynamic "DRAM" of NC memory.
; Delete with memory specification:
Those curve tables with the numbers in the range, which are in the specified memory
type, will be deleted. All other curve tables are retained.
Delete all tables in a particular memory type:
CTABDEL(, , "DRAM")
CTABDEL(, , "SRAM")
CTABDEL()
; all in DRAM or
; all in SRAM:
; all, irrespective of memory type
CTAB(master value, n, degrees, [following axis, lead axis])
CTABINV(following value, approx. master value, n, degrees, [following axis, leading axis])
Detailed description
2.2 Curve tables
31