Siemens sinumerik 840D sl Function Manual page 496

Detailed description
2.1 OEM transformations
When using OEM transformations, the simulation runtime environment has to be set.
Proceed as follows
1. Create a new directory: "<
2. In the "OEM" directory, create the file "DPSIM.TEA" with the following contents:
Special functions: Simulation of Compile Cycles (TE02)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
installation path
"< >/MMC2" in the directory structure of the HMI application on the
computer on which the HMI application (e.g. HMI Advanced) is installed.
$MN_NC_USER_CODE_CONF_NAME_TAB[196]="TRAORI"
$MN_NC_USER_CODE_CONF_NAME_TAB[197]="_TRAORI"
$MN_NC_USER_CODE_CONF_NAME_TAB[198]="TRACON"
$MN_NC_USER_CODE_CONF_NAME_TAB[199]="_TRACON"
CHANDATA(1)
$MC_AXCONF_GEOAX_ASSIGN_TAB[0]=1
$MC_AXCONF_GEOAX_ASSIGN_TAB[1]=2
$MC_AXCONF_GEOAX_ASSIGN_TAB[2]=3
$MC_TRAFO_RESET_VALUE=0
; Make sure that transformation types 4096 - 4101 are deleted
$MC_TRAFO_TYPE_1=0
$MC_TRAFO_TYPE_2=0
$MC_TRAFO_TYPE_3=0
; Delete transformation chains with OEM transformations
$MC_TRACON_CHAIN_1[0]=0
$MC_TRACON_CHAIN_1[1]=0
; NOTICE! No spaces after M30
M30
installation path
>/OEM" in addition to the standard directory:
2
7