Siemens sinumerik 840D sl Function Manual page 331

Example:
CPMSTART[X2]="ON"
Boundary conditions
• The coupling characteristics set with CPMSTART are retained until the coupling module is
• If no coupling characteristics are set with CPMSTART or with set coupling type
Special functions: Axis Couplings and ESR (M3)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
deleted with (CPDEL).
(CPSETTYPE), behavior at parts program start is determined by the following machine
data:
MD20112 $MN_START_MODE_MASK
(definition of initial control system settings with NC-START)
Or at special starts (e.g. search traverse via program test) by machine data:
MD22620 $MN_START_MODE_MASK_PRT
(definition of initial control system settings with NC-START)
; At parts program start, coupling to following axis X2 is
switched on.
Detailed description
2.5 Generic coupling
111