Data Lists; Machine Data; General Machine Data; Machine Data Of The Compile Cycle Function - Siemens sinumerik 840D sl Function Manual

Data lists

5.1

Machine data

5.1.1

General machine data

Number Identifier: $ON_
19610 TECHNO_EXTENSION_MASK[3 (6)]
5.1.2

Machine data of the compile cycle function

General machine data
Number Identifier: $MN_
60972 CC_ACTIVE_IN_CHAN_PROT[2]
61516 CC_PROTECT_PAIRS[5]
61517 CC_PROTECT_SAVE_DIR[5]
61518 CC_PROTECT_OFFSET[5]
61519 CC_PROTECT_WINDOW[5]
Special functions: Axis pair collusion protection (TE9)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
Description
Release of function with the help of MD19610 in Bit 4
$ON_TECHNO_EXTENSION_MASK[2] = 'H10'
Description
The CC_channel is specifically activated with this MD (0 <= xx >= 99).
Bit0 = 1 => Channel 1
Bit1 = 1 => Channel 2 etc.
The axis pairs are determined with this MD. The 1st and 10th decades
define the machine axis number of the first axis, and the 100th and
1000th decade define the machine axis number of the second axis.
Example: $MN_CC_PROTECT_PAIRS[0] = 1201 Axis 1 = 1 Axis 2 = 12 a
wrong configuration is rejected with an alarm.
The concerned free direction of travel of the two axes are recorded here.
The 1st and 10th decades are valid for the first axis, and the 100th and
1000th decade are valid for the second axis. A value > 0 means free
travel in the + direction. 0 means free travel in the - direction
Offset of the two axis with reference to each other.
Minimum distance that must be maintained between the two axes.
5
13