Resu-Specific Part Programs - Siemens sinumerik 840D sl Function Manual

Detailed description

2.4 RESU-specific part programs

• RESU technological function not present.
2.4 RESU-specific part programs
RESU uses the following automatically generated, partially adaptable part programs (already
mentioned in Subsection "Detailed description", "Functional sequence (principle)"):
• Main program: CC_RESU.MPF
• INI program: CC_RESU_INI.SPF
• END program CC_RESU_END.SPF
• Retrace support ASUB CC_RESU_BS_ASUP.SPF
• RESU ASUB CC_RESU_BS_ASUP.SPF
The following figure provides an overview of the internal structure of the technological
function and the relationship between the various part programs.
Figure 2-5 RESU program structure
20
The technological function is not available. The compile cycle may not have been loaded
or has not been activated:
– Alarm "12340 Channel
option not available"
number number
Block Name CC_PREPRE not defined or
Special functions: Retrace Support (TE7)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0