2.4.4
Retrace support ASUB (CC_RESU_BS_ASUP.SPF)
The RESU-specific ASUB CC_RESU_BS_ASUP.SPF causes the NC to travel to the current
path point when retrace support is activated:
• Reapproach next point on path: RMN
• Approach along line on all axes: REPOSA
CC_RESU_BS_ASUP.SPF has the following content by default:
PROC CC_RESU_BS_ASUP SAVE
M17
Note
CC_RESU_BS_ASUP.SPF may be changed.
User-specific modifications must be inserted before the part program block RMN.
Caution
In changing the content of the RESU-specific subroutine CC_RESU_BS_ASUP.SPF, the
user (machine manufacturer) accepts responsibility for the correct sequence of the
technological function.
Special functions: Retrace Support (TE7)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0
RMN
REPOSA
Detailed description
2.4 RESU-specific part programs
25