Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

5.6

Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
• For OMRON THERMAC/INPANEL NEO
• For OMRON Digital Temperature Controller
Item
Device
Information
Network
*1 The following table shows the relation between station numbers of the temperature controller and the GOT data register.
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
Set the monitor target of the set device.
Select this item when writing data to all temperature connected.
During monitoring, the temperature controller of station No.0 is monitored.
All (When writing the data in numerical input, the data is written to all connected temperature controllers
during input, and the temperature controller of station No. 0 is monitored during other than input
(displaying).)
Select this item when monitoring the temperature controller of the specified station No.
After selecting, set the station No. in the following range.
0 to 99:To monitor the temperature controller of the specified station No.
Station No.
100 to 115:To specify the station No. of the temperature controller to be monitored by the value of
GOT data register (GD).
Station No. GOT data register (GD)
100 GD10
101
:
114 GD24
115 GD25
Description
*1
GD11
: (If setting a value outside the range above, a device
5.6 Device Range that Can Be Set
Setting range
0 to 99
range error occurs.)
5 - 31
5