Connecting To Se3000 - Mitsubishi Electric GOT2000 Series Connection Manual

11.5.8

Connecting to SE3000

■1. Key Lock setting
To write the Digital and the Analog parameters, set the Key Lock setting.
■2. Communication settings
Make the communication settings using the engineering software package (PASS)
Protocol
*1*3
Station No.
*2*3
Transmission speed
Data bit
*2
Parity bit
*2
Stop bit
Transmission code
Error check
*1
*2
*3
■3. Setting by Switch (SW1)
Station No. and Transmission speed can be set.
(1) Station No.
SW1-1
OFF
ON
OFF
ON
ON
OFF
ON
11 - 30
11.5 Controller Side Setting
Item
Avoid duplication of the station No. with any of the other units.
Adjust the settings with GOT settings.
Station No. and Transmission speed can also be set by switch SW1.
SW1-2 SW1-3
OFF OFF
OFF OFF
ON OFF
ON OFF
OFF ON
ON ON
ON ON
MODBUS RTU
1 to 31
9600bps, 19200bps
8bits (fixed)
Even, Odd, Non
1bit, 2bits
Binary (fixed)
CRC-16 (fixed)
SW1-4
OFF
OFF
OFF
OFF
:
:
ON
ON
ON
Set value
SW1
SW1-5
OFF 1
OFF 1
OFF 2
OFF 3
ON 29
ON 30
ON 31
Station No.