12.3.3
PLC side setting
■1. Setting of operation mode switch and station No. switch
(1) Station No. setting switch
The station No. setting switches are hexadecimal rotary switches that determine the station No. on the Ethernet
network.
Set the station address (1 to 254) that has been assigned upon system configuration in a HEX code.
Assign an address with a different value to each of the nodes in the system.
Switch name
STN-H
STN-L
12 - 16
12.3 Ethernet Connection
POINT
POINT
POINT
TOSHIBA PLC
For details of TOSHIBA PLCs, refer to the following manual.
TOSHIBA PLC user's Manual
Upper address : 0 to F (Hex.)
Lower address : 0 to F (Hex.)
Station No.
setting switch
Operation mode
setting switch
Setting details
Setting range
01 to FE (Hex.)