11.7 Precautions
■1. Station number settings of temperature controller
In the system configuration, the controller with the station number set with the host address must be included.
For details of host address setting, refer to the following.
➠
11.4.1 Setting communication interface (Communication settings)
■2. GOT clock control
Since the controller does not have a clock function, the settings of [time adjusting] or [time broad cast] by GOT clock
control will be disabled.
■3. Disconnecting some of multiple connected equipment
The GOT can disconnect some of multiple connected equipment by setting GOT internal device.For example, the
faulty station where a communication timeout error occurs can be disconnected from connected equipment.
For details of GOT internal device setting, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
11 - 39
11.7 Precautions
11