Omron Temperature Controller (Omron Thermac/Inpanel Neo) - Mitsubishi Electric GOT2000 Series Connection Manual

5.6.1

OMRON temperature controller (OMRON THERMAC/INPANEL NEO)

Device name
*1
Bit device
Status (S)
Word device
Operation command (A)
Variable area 0 (C0)
Double word
Variable area 1 (C1)
device
Variable area 3 (C3)
*1
*2
*3
5 - 32
5.6 Device Range that Can Be Set
*2
*1*3
*3
*3
Only reading is possible.
Only writing is possible.
Numerical input cannot be used.
When writing, use [Word Set] of a data set switch.
Only 32-bit (2-word) designation is allowed.
POINT POINT POINT
Device settings of OMRON temperature controller (OMRON THERMAC/INPANEL NEO)
(1) When setting the (S)
Make settings for status by a channel number (Decimal) and a bit position (Decimal).
(2) When setting variable area (0), variable area (1) and variable area (3)
Make setting for variable areas by a channel number (Decimal) and address (Hexadecimal).
Setting range
S0000 to S0031
S0100 to S0131
A0000 to A000C
C00000 to C00006
C00100 to C00106
C10000 to C1001C
C10100 to C1011C
C30000 to C3003E
C30100 to C3013E
Bit position
Channel No.
Address
Channel No.
Device No. representation
Decimal + Decimal
Hexadecimal
Decimal + Hexadecimal