Connecting To Cms, Cmf015 - Mitsubishi Electric GOT2000 Series Connection Manual

3.5.8

Connecting to CMS, CMF015

■1. Communication settings
Make the communication settings by operating the key of the control equipment.
Item
*1
Transmission speed
Communication condition selection
*2*3
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of other units.
3.5.9 Connecting to CML, CMF050
■1. Communication settings
Make the communication settings by operating the key of the control equipment.
Item
*1
Transmission speed
Communication condition selection
*2*3
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of other units.
3.5.10 Connecting to MQV
■1. Communication settings
Make the communication settings by operating the key of the control equipment.
Item
*1
Transmission speed
Communication condition selection
*2*3
Station address
*1 Adjust the settings with GOT settings.
*2 Do not set to "0".
*3 Select the station address without overlapping with that of other units.
9600bps
0: 8-bit data length, Even parity, Stop bit 1
1: 8-bit data length, Non parity, Stop bit 2
0 to 99
9600bps
00: 8-bit data length, Even parity, Stop bit 1
*1
01: 8-bit data length, Non parity, Stop bit 2
0 to 7F
9600bps, 19200bps, 38400bps
00: 8-bit data length, Even parity, Stop bit 1
*1
01: 8-bit data length, Non parity, Stop bit 2
0 to 127
Set value
Set value
Set value
3.5 Control Equipment Side Setting
3
3 - 65