Remove And Replace The Optical Engine Mounting Bracket - Toshiba TDP-MT8 Service Manual

Remove and Replace the Optical Engine Mounting Bracket

The optical engine mounting bracket holds the body of the optical engine in the bottom case.
1. Remove the following items:
Lamp door and lamp module (see page 37)
Outer handle (see page 41)
Rear bezel (see page 51)
Top case (see page 57)
Inner handle and front vent (see page 33)
Controller ECA (see page 16)
Optical engine (see page 22)
2. Remove the M3x8 Torx screw that fastens the lip at the front of the chassis to the bottom case. It
is not necessary to remove any of the other chassis screws.
TDP-MT8 Service Guide 24