Remove And Replace The Rear Bezel - Toshiba TDP-MT8 Service Manual

Remove and Replace the Rear Bezel

The rear bezel fastens to the rear of the projector and surrounds the I/O ports. The I/O panel label and
the rear bezel feet adhere to the outside of the rear bezel. The rear bezel contains the rear IR lens and
security plate.
If you replace the rear bezel, you need a replacement I/O panel label. You cannot remove the label from
the rear bezel. A new rear bezel does not include a rear IR lens or security plate.
1. Remove the two M3x8 Torx screws from the rear bezel.
2. Pull the rear bezel away from the projector.
3. Remove the rear IR lens and save it for use with the replacement rear bezel. Press on one of the
tabs on the lens to disengage it from the rear bezel.
TDP-MT8 Service Guide 51