Remove And Replace The Front Ir Receiver - Toshiba TDP-MT8 Service Manual

Remove and Replace the Front IR Receiver

The front IR receiver is located behind the front IR lens in the inner handle. It consists of the IR ECA and
a cable that connects to the controller ECA. The receiver works with others at the rear and both sides of
the projector to provide omni-directional reception of commands from the remote control.
1. Remove the following items:
Outer handle (see page 41)
Rear bezel (see page 51)
Top case (see page 57)
2. Unplug the front IR receiver cable it from J500 on the controller ECA.
3. Slide the front IR receiver upward and out of the alignment slots in the inner handle.
TDP-MT8 Service Guide 31