Remote Problems
Use known good batteries in the remote.
Aim the remote at each of the IR receivers on the projector.
There are IR receivers on all four sides of the projector. Issue
a remote command to each receiver.
TDP-MT8 Service Guide
Infrared remote problem
Does the
remote work?
No
Replace the remote.
Does the
remote work?
No
Does the projector
respond to the command
from any of the IR
receivers?
No
Replace the controller ECA.
(page 16)
Replace the malfunctioning IR
Yes
receiver(s)
Right or left IR receiver or rear
Front IR receiver.
(page 31)
IR receiver.
(page 47)
82