Toshiba TDP-MT8 Service Manual page 42

4. Remove the front IR lens and save it for use with the replacement outer handle. Press on one of
the tabs on the lens to disengage it from its slot on the outer handle.
Assembly Notes
♦
Align the two tabs on the front IR lens with the slots on the outer handle. Press the lens into place to
secure it.
♦
Position the outer handle against the front of the projector so that the pins align with the holes in the
top and bottom case tabs. Then press the outer handle into place against the front of the projector.
TDP-MT8 Service Guide 42