Data Descriptions - Siemens SINUMERIK 840D sl Function Manual

Data Description
8.1 Machine data for SINUMERIK 840D sl
8.1.1 Overview of the machine data
Note
The meaning of the symbols used in the table is as follows:
F This data is calculated into SAFE_ACT_CHECKSUM[0].
J This data is calculated into SAFE_ACT_CHECKSUM[1].
–– This data is not calculated into any checksum.
Table 8-1 Overview of machine data for SINUMERIK 840D sl
Number Name
General ($MN_ ... )
10050 SYSCLOCK_CYCLE_TIME
10060 POSCTRL_SYSCLOCK_TIME_RA TIO
10070 IPO_SYSCLOCK_CYCLE_TIME_RA TIO
10090 SAFETY_SYSCLOCK_TIME_RA TIO
10091 INFO_SAFETY_CYCLE_TIME
10092 INFO_CROSSCHECK_CYCLE_TIME
10093 INFO_NUM_SAFE_FILE_ACCESS
10094 SAFE_ALARM_SUPPRESS_LEVEL
10096 SAFE_DIAGNOSIS_MASK
10097 SAFE_SPL_STOP_MODE
10098 PROFISAFE_IPO_TIME_RA TIO
10099 INFO_PROFISAFE_CYCLE_TIME
10200 INT_INCR_PER_MM
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Name
Basic system clock cycle, see /FB1/, G2
Factor, position controller clock cycle, see
/FB1/, G2
Factor, interpolator clock cycle
Factor for the monitoring clock cycle
Display, monitoring clock cycle time
Displays the clock cycle time for a cross-
wise data comparison
Number of SPL file access operations
Alarm suppression level
Safety Integrated diagnostic functions
Stop response for SPL errors
Factor PROFIsafe communications clock
cycle time
PROFIsafe communications clock cycle
time
Computational resolution for linear positions
see /FB1/, G2
8
Checksums MD
F
––
F
––
––
––
––
––
––
F
F
––
––
8-261