Siemens SINUMERIK 840D sl Function Manual page 7

05.08
In the event of a number of levels of danger prevailing simultaneously, the warning
corresponding to the highest level of danger is always used. A warning with a
warning triangle indicating risk of physical injury may also include a warning of the
risk of damage to property.
Qualified personnel
The device/system may only be set up and used in conjunction with this documen-
tation. Commissioning and operation of a device/system may only be performed by
qualified personnel. Qualified persons are defined as persons who are autho-
rized to commission, to ground, and to tag circuits, equipment, and systems in ac-
cordance with established safety practices and standards.
Intended purpose
Please note the following:
Warning
!
This equipment is only allowed to be used for the applications described in the
catalog and in the technical description, and only in conjunction with non--Siemens
equipment and components recommended by Siemens. Correct, reliable operation
of the product requires proper transport, storage, positioning and assembly, as
well as careful operation and maintenance.
Additional information
Note
This symbol always appears in this documentation where further, explanatory
information is provided.
Test certificates
The attachments to the following test certificates with the certified software and
hardware releases are not included in this documentation. If you require the ap-
propriate attachments, then please use the address specified on the corrections/
suggestions sheet (last page).
A list of the certified software releases and hardware versions is provided with
each "Certificate of Licence (CoL)" of the SINUMERIK Safety Integrated options.
If you have any questions relating to current certifications, please contact your
local Siemens office.
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 05.2008 Edition
Preface
vii