05.08
Fig. 9-3
Softkey "Activate drive commissioning"
Value "95" is entered in drive parameter p0010 to commission the SI drives.
Further, the dialog box to pre–assign the drive PROFIsafe address is started.
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Softkey "Confirm SI data" for 840D sl
Commissioning
9.1 HMI screens and softkeys
9-393