Siemens SINUMERIK 840D sl Function Manual page 272

Data Description
8.1 Machine data for SINUMERIK 840D sl
10389
MD number
Default value: 0
Change becomes effective after: POWER ON
Data type: DWORD
Significance:
Special cases, errors,...
10393
MD number
Default value: 6700, 6724, 6748, 6772,
6796, 6820, 6844, 6868, 6892, 6916,
6940, 6964, 6988, 7012, 7036, 7060,
7084, 7108, 7132, 7156, 7180, 7204,
7228, 7252, 7276, 7300, 7324, 7348,
7372, 7396, 7420, 7444, 7468, 7492,
7516, 7540, 7564
Change becomes effective after: POWER ON
Data type: DWORD
Significance:
Special cases, errors,...
8-272
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
$MN_PROFISAFE_OUT_ASSIGN[n]: 0 ... 15
Output assignment, $A_OUTSE to PROFIsafe module
Min. input limit: 0
Protective stage: 7/2
Assignment between an ext. SPL interface $A_OUTSE and a PROFIsafe output module.
The three lower positions indicate the least significant $A_OUTSE variable to be con-
nected.
The three upper positions indicate the most significant $A_OUTSE variable to be con-
nected.
Example:
PROFISAFE_OUT_ASSIGN[0] = 64061 or alternatively 61064:
The system variables $A_OUTSE[61...64] are placed at the output terminals of the PROFI-
safe module defined in MD PROFISAFE_OUT_ADDRESS[0].
$MN_SAFE_DRIVE_LOGIC_ADDRESS
Logical drive addresses, SI
Min. input limit: 258
Protection level: 7/2
Logical I/O addresses of the SI telegram of drives connected to PROFIBUS. An address is
assigned to a drive.
Max. input limit: 64064
Unit: –
Max. input limit: 8191
Unit: –
© Siemens AG 2008 All Rights Reserved
05.08