Siemens SINUMERIK 840D sl Function Manual page 487

05.08
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
10.2 NCK safety alarms for SINUMERIK 840D sl
198
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[3] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN4. Enter the same MDs and check the cam
enable and cam parameterization
199
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[4] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN5. Enter the same MDs and check the cam
enable and cam parameterization
200
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[5] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN6. Enter the same MDs and check the cam
enable and cam parameterization
201
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[6] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN7. Enter the same MDs and check the cam
enable and cam parameterization
202
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[7] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN8. Enter the same MDs and check the cam
enable and cam parameterization
203
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[8] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN9. Enter the same MDs and check the cam
enable and cam parameterization
204
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[9] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN10. Enter the same MDs and check the cam
enable and cam parameterization
Diagnostics
10-487