Latest Information - Siemens SINUMERIK 840D sl Function Manual

05.08
3.2

Latest information

Important note for maintaining the operational safety of your system.
Warning
!
Systems with safety–related characteristics are subject to special operational
safety requirements on the part of the operating company. The supplier is also
obliged to comply with special product monitoring measures. For this reason, we
publish a special newsletter containing information on product developments and
features that are (or could be) relevant when operating safety–related systems.
By subscribing to the appropriate newsletter, you will ensure that you are always
up–to–date and able to make changes to your system, when necessary.
Go into the Internet under:
http://www.automation.siemens.com
To subscribe to the newsletter, please proceed as follows:
Click on the menu item "Support". You can now open the Internet page for our
"Service & Support" by clicking on the "Service" menu item. By clicking on "Sub-
scribe to our newsletter now" on this page, you can open an additional window in
which you can subscribe to the individual newsletter. Under the "Product Support"
heading on this page, you can see which newsletter is presently available. Please
open the subject area/topic that is relevant for you. You will now be shown which
newsletter is available for this particular subject area or topic. You can subscribe to
the corresponding newsletter by clicking on the box. If you require more detailed
information on the newsletters then please click on these. A small supplementary
window is opened from where you take the corresponding information.
Your subscription should cover the following product areas:
S SINUMERIK Safety Integrated
S SINAMICS Safety Integrated
S SIMATIC S7–300
S Distributed I/O
S SIMATIC software
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
System Features
3.2 Latest information
3-45