A.1 Customer Support - Siemens SINUMERIK 840D sl Function Manual

Appendix
A.1 Customer Support
The Centre of Competence Service (CoCS) – SINUMERIK Safety Integrated
offers users a wide range of services.
Contact addresses
Hotline:
Contact:
Table A-1 Range of services for machine manufacturers and end customers
Portfolio
Concept development
Standard engineering
SPL configuration
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Tel.: +49 (0)180–5050–222
Fax: +49 (0)180–5050–223
E–mail: mailto:ad.support@siemens.com
Enquiry with subject 840D Safety Integrated
Tel.: +49 (0)9131 98 4386
Fax: +49 (0) 9131 98 1359
Description of services
The safety functions are adapted to the machine based on the hazard analy-
sis and the customer's operating philosophy. This includes e.g.:
S Planned operating modes
S Safety functions when the protective doors are closed
S Safety functions when the protective doors are open
S Emergency stop concept
S A study of the safety–related external signals and elements
Based on the concept developed, the standard functions
Safe standstill (SH), safe operating stop (SBH)
S
S Safely reduced speed (SG)
are integrated into the circuit diagram of the machine. External safety ele-
ments (e.g. door interlocking, Emergency Stop button, ...) are either config-
ured conventionally or logically combined using the "safe programmable
logic" (SPL) function.
Based on the standard configuration, the following SPL objects are created:
Function Block Diagram
S
Logic program for the PLC area
S
S Logic program for the NC area
S Data blocks required (e.g. DB 18)
These objects are incorporated/linked into the complete system.
A
®
A-583