ABB i-bus KNX Product Manual page 237

®
ABB i-bus KNX
Commissioning
No.
93
As soon as the set threshold value is exceeded or below the limit, it is possible to send a
.
The object value depends on the data type of the threshold object (1-bit, 1-byte). The parameter can be found in
window a: Threshold
94
95
The upper and lower limits of threshold 1 can be changed via the bus.
The data type of these communication objects depends on the set data type of the communication object Output value –
Input a.
96
See communication object 93
97
See communication object 94
98
See communication object 95
99
Not assigned
100...119
Input b, c
Functionality
Threshold 1
1-bit value [0/1]
1-byte value [0...+255]
1, p. 199.
Change Threshold 1 lower limit
Change Threshold 1 upper limit
Important
The lower limit should be selected to be lower than the upper limit.
Threshold 2
Change Threshold 2 lower limit
Change Threshold 2 upper limit
communication object name
Input a: Temperature sensor
EIS 1 DPT 1.001
EIS 6 DPT 5.001
Input a: Temperature sensor
Input a: Temperature sensor
Input a: Temperature sensor
Input a: Temperature sensor
Input a: Temperature sensor
Data type Flags
Variable C, R, T
DPT variable
Parameter
Variable C, R, T
DPT variable
Variable C, R, T
DPT variable
Variable C, R, T
DPT variable
Variable C, R, T
DPT variable
FCA/S 1.x.x.1 | 2CDC508134D0202 235