Outputs, Valve V1/2, Analog; Inputs - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Device technology
Device type Application
FCA/S 1.2.1.2 Fan Coil Actuator 0-10V/...*
* ... = Current version number of the application. Please refer to the software information on our website for this purpose.
Note
ETS and the current version of the device application are required for programming.
The current version of the application is available on the Internet for download at www.abb.com/knx.
After import into ETS it appears in the Catalogs window under Manufacturers/ABB/Heating, Ventilation,
Air Conditioning/Fan Coil Actuator 0-10V.
The device does not support the locking function of a KNX device in ETS. If you use a BCU code to
inhibit access to all the project devices, this has no effect on this device. Data can still be read and
programmed.
2.3.2

Outputs, valve V1/2, analog

Rated values
2.3.3

Inputs

Rated values
Contact scanning
Resistance
Line length
Maximum
communication objects
70
Quantity
Control signal
Signal type
Output load
Output tolerance
Current limitation
Quantity
Scanning current
Scanning voltage
Resolution, accuracy and tolerances
Between sensor and device input
Maximum Maximum
Group addresses assignments
254 255
2, non-isolated, short-circuit proofed
0...10 V DC
Analog
> 10 kohms
± 10 %
Up to 1.5 mA
3
Floating
1 mA
10 V
PT100 2-conductor technology,
PT1000 2-conductor technology,
A selection of KT/KTY 1,000/2,000,
User-defined
See next page
Maximum 30 m, simple
FCA/S 1.x.x.1 | 2CDC508134D0202 37