Parameter Window E, F, G: Fan (Multi-Level) - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3.8

Parameter window E, F, G: Fan (Multi-level)

All settings for the Multi-level fan are made in this parameter window.
Fan type
Options:
This parameter defines the fan type which is to be controlled.

Multi-level: Controls a fan with up to three speeds.

One-level: Controls a fan with one speed.
Limit fan speeds to 2
Options:
The fan speeds can be limited to two here. The following settings are the same as those for a three-speed
fan, except that they apply only to two speeds.

No: A three-speed fan is controlled.

Yes: A two-speed fan is controlled via fan speeds 1 and 2. Fan speed 3 is non-functional.
124 2CDC508134D0202 | FCA/S 1.x.x.1
Multi-level
One-level
No
Yes