®
ABB i-bus
KNX
Commissioning
3.2.1
General parameter window
Global parameter settings for the whole device are made in this window.
Inactive wait state on KNX recovery
Options:
When in wait state, the gateway does not send any KNX telegrams. Incoming telegrams are received, and
updated in the background. In other words, switching, brightness value and scene commands are updated
in the background, immediately memorizing the end brightness value without transition time. Dimming
commands are ignored. The updated values are only executed when wait state ends and then sent
according to the parametrization.
Send status values on
inactive wait state
Options:
This parameter defines whether or not the KNX commands that arrive during wait state are sent once wait
state is inactive. It is the updated KNX value which is sent.
28 2CDC507164D0201 | DG/S x.64.1.1
2...255 s
Yes
No