ABB i-bus KNX Product Manual page 128

®
ABB i-bus KNX
Commissioning
126 2CDC507164D0201 | DG/S x.64.1.1
Note
When setting dimming times of less than 32 seconds, note that they will be mapped to
the nearest DALI fade time. The conversion is as follows:
Turn on
brightness
in 1 s
0
1
2
3
4
5 and 6
7...9
10...13
14...18
19...26
27...32
> 32...65,535
The fade time is specified as the time required to change the lamp power from the
current brightness value to the required target brightness.
If a lamp is switched off, the preheat and ignition time are excluded from the fade
time.
Selection of Yes option:
Dependent parameters:
Basic brightness for staircase lighting
Options: 100% (255)
99% (252)
...
30% (77)
...
1% (3)
0% (0)
This parameter defines the basic brightness at which the group switches off when the staircase
lighting time has elapsed.
Values set outside the thresholds (maximum brightness/minimal dimming value) are automatically
adjusted to the maximum or minimum.
Fade time in s
acc. to EN 62386-102
jump to
1.0
2.0
2.8
4.0
5.7
8
11.3
16.0
22.6
32.0
Time values with an error tolerance of ±3 s