Groups/Group X Or X Ballasts/Ballast X / Fault Parameter Window - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.5.2 X groups/Group x or X ballasts/Ballast x / fault parameter window
Settings for the reaction of the ballast or group to KNX/DALI voltage or gateway supply voltage failure and
recovery are made in this parameter window.
Users can choose to parametrize the Fault function individually by group/ballast or to adopt the parameters
from the Fault template.
The individual parameter window (X groups/Group x / fault) is the same as the template parameter window
(X template/Fault template). Therefore the description below applies to both the template and the Group x
and Ballast x parameter windows.
140 2CDC507164D0201 | DG/S x.64.1.1