Groups Or X Ballasts Parameter Window - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.5 X groups or X ballasts parameter window
This window is where groups or ballasts are enabled for use on the DALI output. As a group and a ballast
are equivalents on the DALI output, they have the same functions and parameter windows. The group
parameter window and its properties are described below. The corresponding parameter window for the
ballast looks exactly the same, except with the word ballast instead of group.
Selecting the Yes option under Enable DALI groups (group control) or Enable DALI ballasts (individual
control) in the A DALI configuration parameter window enables the X groups and X ballasts parameter
windows.
134 2CDC507164D0201 | DG/S x.64.1.1
Use group x
Options: Yes
No
This parameter specifies which group(s) or ballast(s) the gateway output controls.
•
Yes: Group x is enabled for the output. This in turn enables further parameter windows and
group objects for that group.
•
No: Group x is not enabled for the output. The corresponding parameter windows and group
objects are hidden. This produces a clear, concise ETS view.
Note
Enabling a ballast in the A ballasts parameter window makes it an individual DALI device. It has
been specified for individual control and cannot be assigned to a group.
Note
DALI groups are assigned in the i-bus
®
Tool.