ABB i-bus KNX Product Manual page 68

®
ABB i-bus KNX
Commissioning
Enable Group objects for additional
fault message displays
"Group number fault"
"Switch up next group fault"
Options:
Linked group object:
•
This parameter enables two group objects. The first indicates the number of the faulty group. If there
are several faults, the address of the next group with a fault can be displayed via the Switch up next
group fault group object. Here, a fault means a lamp or ballast fault.
•
Yes: The expanded group fault message display is enabled.
•
No: The additional group objects for number-dependent group fault display are not enabled.
66 2CDC507164D0201 | DG/S x.64.1.1
Yes
No
Group number fault
Switch up next group fault