ABB i-bus KNX Product Manual page 27

®
ABB i-bus KNX
Commissioning
Parametrization options
Minimal dimming/maximum brightness values (dimming
thresholds)
Switch functions
Turn on brightness
Dimming speed for turn on/off
Switch telegram and status
Dimming
Dimming speed for 0...100%
Allow switch on via relative dimming
Brightness value
Dimming speed for transition brightness values
Permit set switch on and off brightness via value
Brightness value and status
Fault messages
Gateway supply voltage fault
DALI voltage fault
DALI device fault (ballast)
Lamp fault
Coded error message via 2-byte group object
Number of devices or groups with a fault
Number of devices or group with a fault
Acknowledge fault messages
Disable fault message via KNX group object
Emergency lighting functions
Emergency lighting converter function test
Emergency lighting battery partial duration test
Emergency lighting battery duration test
Emergency lighting battery query
Inhibit/rest mode (deactivate emergency operation)
Continued overleaf
Group Ballast
 
 
 
 
 
 
 
 
 
 


 
 
 
 
 
 

DG/S x.64.1.1 | 2CDC507164D0201 25
Em lighting
converter




