Status Template (Group X/Ballast X) Parameter Window - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.4.1 X Status template (group x/ballast x) parameter window
This parameter window is a template for all ballasts or groups. If required, each ballast and group can also
be individually parametrized. In this case, the parameter windows are the same as the template window
but the parameter settings are applied to the individual ballast or group.
The status response of the individual ballast and group can be set in the respective ballast/group in the
Group x status and Ballast x status parameter windows. The ballast/group template window does not apply
to the output.
Note
If a ballast stops signaling on the DALI or has a lamp fault, its switch status changes to OFF and its
brightness value status to 0. This is also taken into account when the system calculates the status
values for the DALI output.
90 2CDC507164D0201 | DG/S x.64.1.1